Table of Contents
Craft projects come in all shapes and sizes. Sometimes, I just want to get stuck into something really ambitious and the Summer is a good time to do it. I tend not to travel much in July and August and lots of activities that normally soak up time take a Summer break, so it is time to tackle the Wedding Dress UpCycling project that has been on my To Do list ever since my local Birmingham Hospice charity shop let me have this gorgeous vintage 1980s Grand Duchess Ballgown Wedding Dress designed by Gianna Balenti.

I have always loved wedding dresses. I got married in the 1980s and this dress reminds me of my own. I longed for a dress like this, but didn’t have the budget to buy one ready made so – with all the enthusiasm of a 21 year old – I bought a Vogue pattern and got my old sewing machine out. It was a good fit, in the end – as long as I didn’t laugh too much!

The great thing about a wedding dress is that it uses lots of fabric – so I can be ambitious about the number of things I can make from it.
I am aiming to make 25 saleable items all from one dress which can be sold at local Craft Shows to raise much needed funds for Birmingham Hospice.
Read on to see how the 25 saleable makes take shape …

First Steps
As with all clothes that I obtain from charity shops, the first thing I always do is wash them. In the case of this elaborate wedding dress, I had to unpick all the lace and trimmings and cut away the seams before I could do that.
The lace was marked in places – as long bridal trains often are as they spend so much time in contact with the floor! I soaked the lace in a weak bleach solution to bring it back to a sparkling white again.
Many of the sequins had yellowed with age. I separated out the few that had stood the test of time and remained clear and saved the yellowed ones for the right project later on.
As I took the wedding dress apart, I was careful to observe how it had been constructed – how the lace trim had been attached, how the bow on the back had been stiffened with net etc. These would all be potentially useful techniques for the reconstruction process.
Some of the lace unravelled as it was unpicked and some of it was damaged/snagged, but I cut around as many of the useful pieces as I could. Little flowers and leaves could all be sewn back together and reconstructed with care for compatible projects.
I knew that the most important thing was to find the straight grain of the fabric so I could be sure to cut out the pieces for my repurposed items correctly. For more on this, see my previous post.
Here is what the unpicking process yielded:


So – it is time to get to work on turning that little lot into 25 saleable craft show makes…
Project 1 - A Bridal Tilda Doll
I have made lots of Tilda dolls (see previous posts) – but this one was going to be something really special – a Bridal Tilda Doll.





Even the doll’s body was recycled. The fabric was bought from Birmingham’s fabulous Scrapstore.

Tips and Tricks
The lining fabric is very flimsy, but was useful as a lining for the broderie anglaise I used to make the bottom half of the doll’s body – it covers up the holes in the broderie anglaise nicely so that the stuffing doesn’t poke through.
You have to keep scale in mind on a project like this. The original roses from the headpiece were far too big for a Tilda doll, so I had to construct smaller roses to use for her headpiece. The roses will come into their own later on …


I wanted my bridal Tilda to have a very natural look, so I used teesdale locks and dyed them with tea to get a more natural pale brown colour with varying shades. While they were still damp, I wound them around a knitting needle to give some waves and curls to her hairstyle.
Brides are supposed to have something old, something new, something borrowed and something blue. My bridal Tilda has a repurposed dress, new white broderie anglaise undies, a blue garter and she borrowed her necklace and earrings from her Mum.

Project 2 - Needlecase/Jewellery Case
The white satin lent itself well to making a luxurious looking jewellery case and needlecase. See my previous posts for how to make them up.

Project 3 - Wedding Planner Notebooks/Bookmark
The lace and beads required some sort of appliqué project to make good use of them. I made a notebook cover (link below to my previous post on how to do this) and sewed lace, beads and sequins to a heart shape in the centre to decorate it. Perfect to use for planning a wedding?

Finding the straight grain of the satin meant that I was building up quite a pile of smaller sized scraps as I worked. A Crazy Quilting project was ideal to make good use of these.
The little notebook above was constructed using a pattern from the Kreative Kiwi website. Her patterns are always foolproof and easy to follow. This one comes with a great little video to guide you through the process of sewing all the scraps together and quilting them.
The cute corner bookmark was embroidered “in the hoop” using a pattern free to download from the Kreative Kiwi website – just follow the link below.
Project 4 - Glasses Cases/Key Ring/Scissors Case/Heart Sachets
The next stage was to dig out some of the tried and tested patterns I use to make items for sale on my Etsy shop.
Links to previous posts where you can see how to make each of these items are set out below:

Project 5 - Jewellery Roll and Tissue Case
I bought a pattern to make the jewellery roll. It was trickier than I had anticipated with 2 zips to insert. I am probably going to keep this to use myself rather than sell it. The pattern wasn’t good enough for me to share a link on this site. Definitely a case of “could do better” on this one!

The tissue case, on the other hand, is easy peasy lemon squeezy. I embroidered snowflakes on the front using a free pattern that was available in my Bernina sewing machine embroidery library. The link that shows you how to make the tissue case is below.
Project 6 - A Tiny Teddy Wedding Couple
Well who could resist making a tiny teddy wedding couple?! I just LOVED making these two for each other – to have and to hold!
Project 7 - Christmas Angels
I know it is still Summer – but Christmas arrives so quickly in the crafting world and I want to be well prepared for it this year.
I made up 6 of the Christmas Angels that I have been making for some years now. They used tiny amounts of the white satin which I embroidered with the same snowflake I used for the tissue case and added beads and sequins for an extra bit of glamour.

Three more angels and I was almost done making 25 saleable craft makes. Two of the three were made from patterns used previously – see links below.

The third angel – sitting at the top of the tree – was a flower fairy and a new project for me. This was a great way to use up the satin roses that adorned the tiara that came with the wedding dress. There will be a future post about how to make these and – if you are local to Birmingham – I will be doing a workshop to make them in the run up to next Christmas. Message me for details.
Project 8 - Amora Encora AE05 - Blanche
If you are counting – you will have got to 24 saleable craft makes and may be wondering – what is the 25th? Last, but definitely not least, is Amora Encora doll number 5 – Blanche – Celebrating the Beauty of Snow. Follow the link below to meet her.
Do you have a Wedding Dress you could UpCycle/Donate?
With the average cost of dry cleaning a wedding dress coming in at £160 these days – or nearer £225 if you want it all packed up neatly into a big box afterwards, it is surely worth thinking about donating your dress to charity instead? After all, if you are realistic about it, your dress is very likely to spend the rest of its days sitting in that expensive box up in your loft and never seeing the light of day again!
So – if you have a wedding dress sitting in your loft that you never do anything with, why not think about recycling it into something you can sell to support a local charity? I really hope that this post has given you some inspiration to get started.
A Happy Ending
I always love stories with happy endings. This post recently led to a request to make a custom order Tilda Doll from a customer’s own wedding dress. Sue sent me her beloved wedding dress, the cotton underskirt and all the trimmings she had carefully kept boxed up together in store since her Wedding Day.







The first thing I made use of was the cotton underskirt with its pretty broderie anglaise trim. I used this to make 2 petticoats for the Tilda doll – it was great that they were already pre-gathered ready for me! The rest of the cotton underskirt was used underneath the lace to add stability and firmness to the lace. The lace was a little yellowed with age, but a treatment with the magic of Oxi Clean gently brought the white lace back to its sparkling white original colour. I always have a tub of this wonder product to hand.

The bright pink bridesmaid’s gloves were a conundrum for a while as they were very bright compared to the pale pink rose colour of the headdress flowers which Sue wanted to use. I decided to use them to make the bottom half of the doll so the playful bright pink dotted net only makes an appearance when you lift the doll’s skirts – no photos – Tilda dolls are modest beings!
The doll’s headdress was constructed from various pieces of Sue’s original headdress. The pearls were used for both the headdress and the bodice trim. I cut the pink garter in half to trim both legs and used its central bow for the centre of the bodice. A few pink ribbon roses added the all important final finishing touches and Sue’s doll was ready for despatch to its proud new owner who has an upcycled Lloyd Loom chair all ready and waiting for her. What a lovely way to make good use of your old wedding dress – and the proceeds will also support a good cause. – Birmingham Hospice?






Happy Feedback
“Margot she is absolutely beautiful I love her! I am thrilled and will treasure her. You really are very talented, and having kept it all these years I am so glad I entrusted my special dress to you. THANK YOU SO MUCH!” Sue x

Custom Order Dolls
If you have a wedding dress that you would like made into a keepsake doll, please contact me via Etsy for a custom order.
Supporting Birmingham Hospice
There are so many ways to support a good cause like Birmingham Hospice. Volunteering takes many forms – crafting is my own way of giving back.

This is such an inspiring guide to discovering your passion and finding a clearer sense of direction in life! I love how thoughtful reflection and exploring new interests can help uncover what truly motivates us. A valuable read for anyone looking to grow, find inspiration, and create a more fulfilling life!
Fantastic work Margot. You have such lovely ideas. I have really enjoyed reading all about your great projects. I am sure you will keep up the good work,
Hope yo see you at MMR in August x
Thanks Marion! x